Setting Your Bluetooth Voice Priority; Sending Data Via Bluetooth - Sanyo SCP2700 Operating Manual

•
HFP: Hands-Free Profile - This profile functions as a wireless car kit. Incoming calls ring to
the hands-free headset or device. Calls can be received by pressing a button on the
headset or device. For dialing, four functions are supported; recent call dial, voice dial,
speed dial and number dial. Increase or decrease the volume by using the volume key.
•
DUN: Dial-Up Network Profile - This profile functions as a wireless data cable, connecting
a computer or PDA to a network through your phone.
•
OPP: Object Push Profile - This profile uses the Generic Object Exchange profile services
to send data objects between devices and can be used to exchange Contacts and business
cards (vCard).
•
PBAP: Phone Book Access Profile – This profile enables exchange of Contacts
information between devices. It is typically used between a car kit and a mobile phone to
allow the car kit to display the name of the incoming caller.

Setting Your Bluetooth Voice Priority

1. Press MENU/OK > Settings/Tools > Settings > Bluetooth > Voice Priority.
2. Select an option and press MENU/OK:
Phone to set your phone as a default device for voice calls even if you initially answer
the call with the connected hands-free device.
Hands-free to set the connected hands-free device as a default device for voice calls
even if you initially answer the call with your phone.
Device Answer to set the device used for answering the call as a default device for
voice calls.
Tip: Press OPTIONS (right softkey) > Transfer Audio to switch your device for voice calls
between your phone and the hands-free device during a call.

Sending Data via Bluetooth

You can send data saved on your phone to another Bluetooth device.
1. From the Trusted List, highlight a device and press OPTIONS (right softkey) > Send Item.
2. Select an option (Business Card, or Contacts) and press MENU/OK.
3. Follow the onscreen instructions to select an item to send.
4. Make sure the other device is ready to receive data, and then press SEND (left softkey).
5. Enter the passcode and press MENU/OK if necessary.
59