Configuring Microsoft Windows Vista - SMC Networks SMCD3USG Install Manual

4.3 Configuring Microsoft Windows Vista

Use the following procedure to configure a computer running Microsoft Windows Vista with the default
interface. If you use the Classic interface, where the icons and menus resemble previous Windows
versions, perform the procedure under "Configuring Microsoft Windows 2000".
1. On the Windows taskbar, click Start, click Control Panel, and then select Network and Internet Icon.
2. Click View Networks Status and tasks and then click Management Networks Connections.
3. Right-click the Local Area Connection icon and click Properties.
4. Click Continue. The Local Area Connection Properties dialog box appears.
5. In the Local Area Connection Properties dialog box, verify that Internet Protocol (TCP/IPv4) is
checked. Then select Internet Protocol (TCP/IPv4) and click the Properties button. The Internet
Protocol Version 4 Properties dialog box appears.
15