Connecting The Ipod® Or External Usb Device; Using This Feature - Jeep COMPASS 2015 Owner's Manual

Connecting The iPod® Or External USB Device
Use the connection cable to connect an iPod® or external
USB device to the vehicle's USB/AUX connector port
which is located in the center console or glove compart-
ment.
AUX/USB Connector Ports
UNDERSTANDING YOUR INSTRUMENT PANEL 289
Once the audio device is connected and synchronized to
the vehicle's iPod®/USB/MP3 control system (iPod® or
external USB device may take a few minutes to connect),
the audio device starts charging and is ready for use by
pushing radio switches, as described below.
NOTE: If the audio device battery is completely dis-
charged, it may not communicate with the iPod®/USB/
MP3 control system until a minimum charge is attained.
Leaving the audio device connected to the iPod®/USB/
MP3 control system may charge it to the required level.

Using This Feature

By using an iPod® cable, or an external USB device to
connect to the USB port:
• The audio device can be played on the vehicle's sound
system, providing metadata (artist, track title, album,
etc.) information on the radio display.
4