Chapter 1
[1]
F-1-5
5) Remove the 2 screws [1], and detach the grounding spring [2].
6) Remove the screw [3].
[2]
[1]
[3]
F-1-6
7) Remove the 3 screws [1], and detach the registration roller upper stay [3] together with the grounding spring [4]
while freeing the spring [2] off its hook.
[3]
[2]
[4]
[1]
F-1-7
8) Open the registration upper guide [1], and clean the back [1] of the upper guide and the lower guide [2] using lint-
free paper moistened with alcohol.
9) Remove the paper lint building up on the transparency sensor [3] using a blower brush.
1-20