Playing Files From Usb Memory Devices - Roberts Opus Manual

Playing files from USB memory devices

1. Carefully insert the USB memory device into the USB socket on the top
of the radio. To remove the USB memory device, gently pull the device
out when the radio is in standby.
2. Press the On/Off button to switch on your radio. The radio will beep to
confirm that it is now switched on.
3. Press the USB button to select the USB mode.
4. The display will show 'USB Reading...'. The radio will now list the content
stored on the USB memory device. If there are many files or folders this
may take a few seconds.
5. The number of files and folders will be displayed.
Files are played in the order in which they exist in the filing system of the
USB memory (they are not sorted by file name or track number).
Note: The USB memory device should not be removed during playback or
recording as damage or corruption of files may occur.
Note: If the unit is in USB mode but stopped for more than 15 minutes then it
will automatically enter standby. If powered from batteries the radio will then
switch off completely. To use the radio again, simply press the On/Off button
to switch it on.
17
10
FM
DAB
On/Off
USB
USB Reading...
FILE 177
FOLDER 012
USB