Page 2
Quick Reference Guide – KI2400/KI2800 Light Source KI2400/KI2800 HAND HELD FIBER SOURCE, • To select modulation while source is on, press and release [Mode]. Press [Mode] again to select next Manual operation available frequency or ID-tone. Alternatively, press and • To remove interchangeable connector adaptor, press button hold [Mode] then use [ - ] or [ + ] to cycle through all on front of case and pull off adaptor.
Page 3
QUICK REFERENCE GUIDE: LIGHT SOURCE Change Records: Date Editor Change description 20/4/2017 TO Ng Added instruction to view full segment of display & to view FW version (under 3 under Manual Operation section).