Save & Exit Setup; Exit Without Saving - Shuttle FS56 User Manual

@
Save & Exit Setup
Pressing <Enter> on this item asks for confirmation:
Pressing "Y" stores the selections made in the menus of CMOS - a
special section of memory that stays on after you turn your system off.
The next time you boot your computer, the BIOS configures your
system according to the Setup selections stored in CMOS. After saving
the values the system is restarted again.
@

Exit Without Saving

Pressing <Enter> on this item asks for confirmation:
This allows you to exit from Setup without storing in CMOS any
change. The previous selections remain in effect. This exits from the
Setup utility and restarts your computer.
Save to CMOS and EXIT (Y/N)? Y
Quit without saving (Y/N)? Y
- 76 -