Introduction; To Different Users; First-Time Diy System Builder; Experienced Diy User - Shuttle FS56 User Manual

Pentium 4/celeron, 478-pin processor based ddr main board

Hide thumbs Also See for FS56:

Table of Contents

Welcome to the DIY world! Building your own computer system is not as diffi-

cult as you may think. To make your first computer DIY experience successful,

right from the start, we have designed the 3.1 Hardware Installation section

in a step-by-step fashion for all the first-time DIY system builders. Prior to instal-

lation, we also suggest you to read the whole manual carefully to gain a com-

plete understanding of your new Shuttle FS56 mainboard.

Congratulate on your purchase of the Shuttle FS56 mainboard. You will find

that installing your new Shuttle FS56 mainboard is just easy. Bundled with an

array of onboard functions, the highly-integrated FS56 mainboard provides you

with a total solution to build the most stable and reliable system. Refer to sec-

tions 3.2 Jumper Settings and Chapter 4 Drivers/Software Utilities to

find out how to get the best out of your new mainboard. Chapter 5 BIOS

Setup also contains the relevant information on how to tune up your system to

achieve higher performance.

You have wisely chosen Shuttle FS56 to construct your system. Shuttle FS56

incorporates all the state-of-the-art technology of the SiS 661FX chipset from

SiS. It integrates the most advanced functions you can find to date in a com-

pact Small Form Factor ATX board.

1 INTRODUCTION

- 6 -

Table of Contents