Other Connectors Atx Power Supply Connectors (Cn5/Jp7) - Shuttle FS56 User Manual

Pentium 4/celeron, 478-pin processor based ddr main board

Hide thumbs Also See for FS56:

Table of Contents

Other Connectors

ATX Power Supply Connectors (CN5/JP7)

This motherboard uses 20-pin (CN5) Pentium 4 standard ATX power header,

and JP7 with 2X2-pin +12V PC ATX power supply headers.

Please make sure you plug in the right direction.

P4 ATX Power supply

CN5

JP7

Note : This motherboard can't support AC power resumes from

Note 1 :

Note 2 :

Note 3 :

Note 4 :

power failure, you must press power button to power-on.

The ATX power connector is directional and will not go in unless the

guides match perfectly making sure that pin#1 is properly positioned.

Make sure the latch of the ATX power connector clicks into place to

ensure a solid attachment.

Your ATX power supply must be supplied to ACPI +5V standby power

and at least 720mA compatible.

Make sure your power supply have enough power for higher speed

processor installed.

- 35 -

ATX12V

JP7

ATXPWR

CN5

Table of Contents