Shuttle FS56 User Manual page 14

Pentium 4/celeron, 478-pin processor based ddr main board
Hide thumbs Also See for FS56:
Table of Contents

Advertisement

- System BIOS
Provides licensed Award BIOS V6.0 PG on 2Mb Flash core and supports
Green PC, Desktop Management Interface (DMI).
- Form Factor
System board conforms to Shuttle small form factor ATX specification.
Board dimension: 254mm x 185mm.
- Advanced Features
Ø Low EMI - Built in spread spectrum and automatic clock shut-off of
unused PCI/SDRAMS slots to reduce EMI.
Ø Dual Function Power Button - The system can be in one of two states,
one is Suspend mode and the other is Soft-Off mode. Pushing the power
button for less than 4 seconds places the system into Suspend mode.
When the power button is pressed for longer than 4 seconds, the system
enters Soft-Off mode.
Ø Modem Ring Power-On - The system can be powered on automatically
by the activation of modem ringing.
Ø CPU Host/DRAM Clock Setting - These items allow users to adjust
CPU Host/DRAM Clock in BIOS.
Ø CPU Multiplier Setting - This item allows users to adjust CPU Multiplier
in BIOS.
Ø CPU/RAM/AGP/Chipset Voltage Setting - These items allow users to
adjust CPU/RAM/AGP/Chipset Voltage in BIOS.
- Intelligent Features
Ø Voltage Monitoring - Monitors various voltages of key elements, such
as the CPU, and other critical system voltage levels to ensure stable
current passing through mainboard components.
Ø Fan Status Monitoring - To prevent CPU from overheating, the CPU fan
is monitored for RPM and failure. (CPU Cooling FAN with RPM sensor is
required.)
Ø Temperature Monitoring - This item allows users to make sure whether
the CPU or system runs in a suitable temperature.
Ø CPU Fan AutoGuardian - This SMART Bios enabled 3 phase Variable
Fan Speed and CPU temperature Control feature.
- 10 -

Advertisement

Table of Contents
loading

Table of Contents