Table of Contents
Advertisement
4. Open the sealed ink cartridge container and,
grasping the thumb and finger grip, remove
the new ink cartridge from it.
5. Remove the protective tape/capsule from the
new ink cartridge.
Do NOT touch the ink pad area on the cartridge.
6. Insert the new cartridge in the print head
casing immediately, pressing it until it clicks
into place.
(a) monochrome cartridge in the left casing,
(b) colour cartridge in the right casing.
More about print heads
7. Before closing the printer cover, press and
hold PAPER and press POWER for at least
two seconds to signal that a new ink cartridge
has been inserted. The light indicator will
flash three times in acknowledgment.
Remove the ink cartridge ONLY to replace it. Do
NOT remove and then reinsert it.
If the new ink cartridge is not inserted correctly,
the light indicator on the operator panel will
continue to flash. You must repeat completely
the replacement operation.
If the quality of printing is not optimum, do the
"Clean" operation (see "Printer Monitor").
After you have replaced several ink cartridges in
the same print head, you must replace the entire
print head.
If you have problems inserting the print head or
ink cartridge:
•
Make sure the print head carriage is in the
print head loading position.
•
Check that the print head/chamber is clean
and free of foreign bodies.
•
NEVER force the print head into the chamber
or the ink cartridge into the print head; always
remove it completely and repeat the entire
insertion operation.
17
Advertisement
Table of Contents
