Cover Sheet Feeder Adj - Olivetti PI-503 Service Manual

7. Finisher
7.1.3

Cover Sheet Feeder Adj.

• To make automatic cover sheet feeder size detection adjustments separately in each of
Functions
the upper and lower trays.
• Make this adjustment at the time of setup or when the cover sheet feeder cannot make
Use
proper size detection.
1. Call the Service Mode to the screen.
2. Touch [Finisher].
3. Touch [FS-FN adjustment].
4. Touch [Cover Sheet Feeder Adj.].
5. Touch [Upper Tray].
6. Place A4S paper on the upper tray and touch [A4
7. Press the Start key.
Setting/ 8. Make sure that [Adj. Result] is [OK].
Procedure 9. Touch [Lower Tray].
10.Place A4S paper on the lower tray and touch [A4
11.Press the Start key.
12.Make sure that [Adj. Result] is [OK].
13.Touch [END] twice.
14.Touch [Exit] on the Service Mode screen.
15.Turn OFF the main power switch. then, wait for 10 sec. or more and turn ON the main
power switch.
22 Service Manual
Field Service Ver. 2.0 Aug. 2007
].
].
Y107982-5