Intercomp CW250 User Manual page 21

13. The display will show "". Press the PRINT/ACCUMULATE button. The display
will show the current Radio Enable setting in flashing mode. The radio enable status
setting is either on or off. Use the LOCAL/TOTAL button or the ZERO button to
toggle between the settings. When the desired status setting is flashing, press the
PRINT/ ACCUMULATE button. If "no" is selected, the scale will skip the remaining
radio function settings and return to normal weighing.
14. The display will show "". Press the PRINT/ACCUMULATE button. The flashing
digit shows the current Radio Channel setting. All scales in a system must be set to
the same radio channel setting to be able to communicate with each other. Use the
LOCAL/TOTAL button to increment and the ZERO button to move the flashing
number to the left. When the display shows the desired radio channel setting, press
the PRINT/ACCUMULATE button.
15. The display will show ".". Press the PRINT/ACCUMULATE button. The display
will show the current setting with the far right digit in flashing mode. All scales in a
system must be set to the same Personal Area Network ID setting to be able to
communicate with each other. Use the LOCAL/TOTAL button to increment and the
ZERO button to move the number flashing to the left. When the display shows the
desired number, press the PRINT/ACCUMULATE button.
16. The display will show "". Press the PRINT/ACCUMULATE button. The
display will show "" with the far right digit in flashing mode. For security
purposes, the actual Encryption Key setting is not accessible for viewing and will
always be displayed "". Use the LOCAL/TOTAL button to increment and the
ZERO button to move the flashing number to the left. To set up a new encryption
key, enter any number from 1 to 65534. Enter "0" to retain the current encryption
key setting. All scales in a system must be set to the same encryption key setting to
be able to communicate with each other. When the desired encryption key is
displayed, press the PRINT/ ACCUMULATE button.
"
17. The display will show ".". Press the PRINT/ACCUMULATE button. The display
will show "" with the number flashing. There are two settings available under the
"Restore Radio Defaults" feature. Select "0" to retain current settings. Select "3" to
restore the default radio settings. All other numbers will have no effect on radio
setup. Use the LOCAL/TOTAL button to increment and the ZERO button to
decrement the number. When the desired number is flashing, press the PRINT/
ACCUMULATE button. The scale will return to normal weighing.
NOTE: If the scale does not have the radio option installed, settings "",
"" and "" and the Radio Encryption Key can only be
accessed in a "View Only" mode.
Page 21 of 31
CW250, Users
Rev M, April 2018