Router Mode - Tenda N300 Wi-Fi xPON ONT Quick Installation Manual

2. Configure the internet access
Tips:
Choose a desired mode to configure your internet access:
• Router mode: Choose this mode if your internet access type is PPPoE or DHCP.
• Bridge mode (default): Choose this mode if your internet access type is PPPoE.

Router mode

Option 1 Access internet over PPPoE
Step 1: Log in to the web UI
Connect a LAN port of the ONT to a computer using an Ethernet cable, or connect your smartphone to
the Wi-Fi network of the ONT using the SSID (Wi-Fi name) and Key (Wi-Fi password) on the bottom
label.
Start a web browser and visit 192.168.1.1.
Enter the User Name and Password (admin for both by default).
Click Login.
Tips:
If the above page does not appear, refer to Q1 in FAQ.
Step 2: Set up a WAN connection
Choose WAN > PON WAN.
Tick Enable VLAN, and enter the VLAN ID provided by your ISP.
Set Channel Mode to PPPoE.
Set Connection Type to INTERNET.
Enter the PPPoE UserName and Password provided by your ISP.
Set other parameters according to your ISP and your own need.
Click Apply Changes.
192.168.1.1
User Name:
Password:
Login Reset
4