Specifications - Seametrics IP800 Series Instructions Manual

GENERAL INFORMATION
Specfications*
Pipe Size
Power
Sensor
Materials Optional Housing
Sensor Body
O-ring
Rotor
Shaft
Bearings
Maximum
Pressure
High Pressure
Temperature
Flow Velocity
Accuracy
Output Transistor Maximum Current Sinking
Cable
Regulatory
*Specifications subject to change • Please consult our website for current data (www.seametrics.com).
Kynar is a registered trademark of Arkema, Inc., Viton is a registered trademark of DuPont Corporation.
Seametrics • 253.872.0284
1/2" to 8"
Low Power: 6-36 Vdc/< 2 mA
Low Power: Digital Magnetoresistive
Powder-coated cast aluminum
Brass, 316 Stainless Steel, PVC, or Polypropylene
EPDM (Viton® optional)
PVDF (Kynar®)
Kynar® /Tungsten Carbide (Kynar® /Ceramic or Kynar®/Silicon Carbide optional)
Ruby jewel
Brass
200 psi (14 bar)
Not available
200˚ F (93˚ C)
0.3 to 30 ft/sec (0.9 to 9.14 m/sec)
± 1.5% of full scale
150mA (low power version only)
#22 AWG 3-con, 18' (6m); 2,000' (610m) maximum cable run Note: 50' (15m) maximum for battery powered or
micropowered versions.
Mark
Page 4
IP800-SERIES INSTRUCTIONS
Micropowered (-04 Option): 3.1-16 Vdc/60 μA @ 3.6 Vdc
Micropowered (-04 Option): Giant Magnetoresistance (GMR)
316 Stainless Steel
200 psi (14 bar)
400 psi (28 bar)
200˚ F (93˚ C)
PVC or Polypropylene
(See Pressure vs. Temp. Chart)
175 psi (12 bar) @ 75˚ F (24˚ C)
Not available
130˚ F (55˚ C)
seametrics.com