Parameter Setup - Seametrics jWAVE Instructions Manual

APP INSTALLATION

Parameter Setup

Use the handy parameter selection screens to set your units of measure and display preferences.
Conveniently select pipe, liner, and liquid specifications from lists of pre-loaded values. Don't see the
right option? Add your custom values!
Units
Toggle between
English and metric
units of measure.
Select Flow Rate,
Volume, and
Velocity from our
pre-loaded values.
Seametrics • 253.872.0284
Display
The main screen
displays two outputs.
Drag and drop the
two outputs that
you rely on most to
display on the main
screen.
Pipe
Select Pipe Type,
Size, and Wall
Classifications from
our pre-loaded
values or add custom
values by selecting
Custom under Pipe
Type. When entering
a custom type, you
must supply the
outer diameter, wall
thickness, speed of
sound through the
pipe material, and the
surface roughness
—
enter zero if unknown
.
roughness
Page 7
jWAVE INSTRUCTIONS
Liner
Switch between liner
and no liner. When
selecting Liner
Enabled, enter
Liner Thickness
and choose Liner
Material from our
pre-loaded list or add
custom values. When
adding a custom
material, you must
enter the speed of
sound through that
material.
Liquid
Select Liquid Type
and Temperature
from our pre-loaded
list of values or add
a custom liquid
type. When adding
a custom liquid, you
will need to enter
the speed of sound
through that liquid,
the viscosity, and the
density.
seametrics.com