Advertisement
DI/1 TOOL CONTROL UNIT
CONTENTS
DESOLDERING STAND
DR-SA
Connectable tools: T210, T245, PA120, HT420, AP130, DR560 and DS360.
Connectable modules: MS, MV and MN.
HEAT MANAGEMENT
JBC stations intelligently manage the tool temperature:
Work mode: When the tool is used, pre-set work temperature is 350º C.
Sleep mode: When the tool is in the stand, the temperature goes down to 220º C.
Hibernation mode: After longer periods of inactivity (pre-set i.e 30 minutes), the power is cut off and the
tool cools down to room temperature.
The advantage of this heat management is lifespan increase which ensure low cost of ownership
2
CONTROL UNIT
DI-2B / DI-1B / DI-9B
USB Connector
Power Cord Socket
DESOLDERING PUMP
MS-A
to PC
DI
1 tool
control unit
Reference Guide
Advertisement
