Software Update - Saeco Phedra Evo D.A. 5P2015 Operation And Maintenance

English
Lower filter:
• unscrew the two side screws (1) and remove the upper
piston stop (2)
• manually rotate using the key (not supplied) until the
lower filter is flush with the cup
• unscrew screw (1) and replace filter (2)
• reassemble all the parts following the reverse order.
Carefully blot the upper
and lower filter and blow
with compressed air.
84
10.4

Software update

The vending machine management program is stored in
the flash memory inside the CPU board.
The software update can be performed by using:
• a USB key (Pen Drive);
• a file containing the new software to be loaded.
Update procedure:
• copy the file
"SAE_PHEE_VXXXXX.s19" (where XXXXX is the
version number) onto a USB key* (the file should be
stored on the device root);
• rename the file as: "SAE_PHEE.s19 ".
If the file name is not
correct, the software will
not be recognised (the red
light on the CPU will
remain on).
If the file name contains
empty spaces, the software
will not be recognised (the
red light on the CPU will
remain on).
• switch off the vending machine;
• insert the USB key into the CN1 connector;
received for update