Saeco Phedra Evo D.A. 5P2015 Operation And Maintenance page 57

DISPLAY
2.4.15.
no change =no bills
...
2.5.
Max credit
255
2.6.
Multivend
no
2.7.
Overpay Time
180
2.8.
Fixed Zeroes
0
2.9.
Decimal Digits
0
2.10.
Credit Wdog
0
2.11.
Preselection
2.11.1.
Pre-selection Time
2.12.
Cash sale cmd sending
2.13.
(EXE/PHD) safe mode
no
3.
PRODUCT SETUP
...
3.1.-2
Product Before
...
3.2.
Beverage Enabling
...
3.3.
Beverage Preparation
...
Allows you to disable the bill reader if there is no change.
It allows the user to set the maximum credit which can be accepted by the vending machine.
Once this limit has been reached, the payment systems are disabled so that no more credit can be
accepted.
Default = 20.00.
Enables the user to use any residual credit to purchase other beverages.
By setting "N" (no), the residual credit will be collected by the vending machine.
It establishes the maximum time (expressed in seconds) beyond which the vending machine collects the displayed
residual credit.
The time is adjustable at intervals of 10 seconds.
Setting "000" the function is disabled.
Enables setting of the number of fixed zeros of the credit.
Enables setting of the position of the decimal point of the credit.
Enabling this option, an internal control is activated, which resets the communication with
the payment systems if the communication is blocked.
Management of pre-selection options
Pre-selection time duration (in seconds)
It enables the management of the cash sale notification command (for card reader MDB)
"safe" mode of protocol EXE/PHD.
It does not accept selling controls outside the pre-selection time of the machine.
It allows selecting the instant product for which you wish to enable powder dispensing
before water dispensing. This brewing cycle will be carried out only when the quantity of
powder to be brewed does not exceed 34.
It allows to enable or disable the beverage keys.
The vending machine can dispense up to 18 beverages.
Each beverage can be prepared by using ground coffee and/or instant products.
Technicians can select the desired products for the recipe (max 4) and their order of use.
Each component is identified by a number or a letter.
Description
English
57