Led Behavior; Front Panel Led Behavior - Cisco TelePresence Server MSE 8710 Getting Started

LED behavior

Front panel LED behavior

Table 1 describes the behavior of the LEDs on the front of the Cisco TS MSE 8710.
TS MSE 8710
Table 1: Cisco
LED
USB Port Activity
Admin Port Activity
Status
Alarm
Ethernet Port Status, for each
Ethernet port:
Power
front panel LED behavior
Color
Green
Green
Green
Red
FDX Green
Act Green
Link Green
Blue
Indicates
Reserved for future expansion
Reserved for future expansion
The Cisco TS MSE 8710 is operating
normally
The Cisco TS MSE 8710 is booting or
has developed a fault, for example:
temperature is outside normal limits

battery failure of the internal clock

Refer to the web interface for more
information about the problem (go to
the configuration page for your Cisco TS
MSE 8710).
The link has been established as a full-
duplex link
Packets are being transmitted on this
port.
The speed of the link from this port
which is either 100, or 1000Mbps.
The CiscoTS MSE 8710 is receiving
power from the MSE 8000 chassis
LED behavior
4