Clock Parameters; Sequencer - Sequential Prophet Rev 2 User Manual

Set to 1, only the held notes are arpeggiated. Set to
Arp Range: 1, 2, 3 —
2, the held notes and the notes one octave above them arpeggiate. Set to
3, the held notes and the notes one and two octaves above them arpeggiate.
Set to 1, each note in the arpeggio plays once.
Arp Repeats: 1, 2, 3 —
Set to 2, each note in the arpeggio plays twice. Set to 3, each note in the
arpeggio plays three times.
Works in conjunction with
Arp Relatch: Off, On—
the arpeggiator are on, and
arp relatch
and arpeggiated, with additional played notes added to the held notes
and the arpeggio. When
arp relatch
arpeggiated, but additional played notes will restart the arpeggio with the
new notes.

Clock Parameters

Sets the tempo for the arpeggiator in BPM (beats per
BPM: 30...250—
minute). The LED flashes at the BPM rate. When
tap tempo
enabled on the low-frequency oscillator, or
section, the BPM rate affects the LFO frequency and/or delay effect. When
syncing to an external MIDI clock source, the BPM setting has no effect.
Selects a basic note value relative to the BPM. See the table below:
Divide—
Name Tempo Timing Division
Half BPM/2 Half note
Quarter BPM Quarter note
8th BPM x 2 Eighth note
8 Half BPM x 2 Eighth note, half swing timing
8 Swing BPM x 2 Eighth note, full swing timing
8 Trip BPM x 3 Eighth note triplets
16th BPM x 4 Sixteenth note
16 half BPM x 4 Sixteenth note, half swing timing
16 Swing BPM x 4 Sixteenth note, full swing timing
16 Trip BPM x 6 Sixteenth note triplets
32nd BPM x 8 Thirty-second note
32 Trip BPM x 12 Thirty-second note triplets
64 Trip BPM x 16 Sixty-fourth note triplets
44 Arpeggiator
. When and
hold hold
is off, played notes are held on
is on, played notes are held on and
is
lfo sync
is enabled in the Effects
clk sync
Sequential
Tapping the
Tap Tempo—
tap tempo
flashes at the BPM rate you set. For best results, tap the button 4 times.

Sequencer

There are 2 types of sequencers in the Prophet Rev2:
• 1-track, 64-step polyphonic sequencer for creating a repeating pattern of
chords and melodies
• 4-track, 16-step, non-polyphonic gated sequencer for creating a repeating
pattern for modulation (and can also be used for notes)
Press to toggle between
gated sequencer and
polyphonic sequencer
SEQUENCER
rest
Gated
Poly
TYPE MODE TRACK
tie
Poly Seq
Only
DESTINATION RECORD
The Sequencer
Polyphonic Sequencer
With the polyphonic sequencer you can create sequences that are rhyth-
mically and melodically complex by constructing a repeating musical
phrase with notes, ties, and rests. You can play up to 64 steps with up to
6 notes held simultaneously per step. Use the
controls to adjust sequencer playback speed.
In addition, you can play along with a sequence (provided there is avail-
able polyphony), making it a powerful live performance tool. When the
sequencer is playing, the arpeggiator is disabled.
Prophet Rev2 User's Guide
button sets the tempo. The LED
, , or
bpm divide tap tempo
Sequencer 45