Table of Contents
Advertisement
Email messages provide error notification
Email notification allows the XstreamCORE to send an Email
message to you, a network administrator or other users when
certain events occur. Serious error messages are sent
immediately, while messages for less serious errors are sent
every 15 minutes.
You may send Emails to up to five Email addresses and
designate which conditions prompt each Email notification.
When an event that has been designated as requiring Email
notification occurs, the XstreamCORE sends the message; it
cannot respond to a rejection by a server for an invalid
address. Ensure all Email addresses typed in are valid.
Each Email is time stamped when it leaves as part of the
SMTP header information.
E
12 T
E
XHIBIT
HE
MAIL MESSAGES SENT BY THE
Subject: [The Type of Event that Occurred]
Message Body:
This is a status message from [XstreamCORE name]. Identifying information as well as the most recent entries from the event log
appear below.
*************** Unit Information ***************
Serial Number : [Serial Number]
IP Addresses:
*************** Event Log Entries ****************
X
CORE
STREAM
FOLLOW THIS FORMAT
[IP Address1]
[IP Address2]
1.
If you are not already in the XstreamVIEW™ interface,
type the IP address of your XstreamCORE in a standard
browser as found in Using XstreamVIEW™ System
Manager, click Enter Here, type in your user name and
password, and click OK.
2.
On the left-hand menu, click Remote Management.
3.
The Remote Management page appears.
4.
Click on the enabled radio button next to the Email
Notification heading.
5.
Type in the SMTP Server IP address.
6.
Type in the user name and password of your SMTP Email
account if your server requires it
7.
Type in the sender address (Emails show this name in the
From field).
8.
Type in up to five Email addresses.
9.
Choose All, Warning, or Critical for each Email address.
10. When all information is typed in, click Submit.
.
22 |
P a g e
Hide quick links:
Advertisement
Table of Contents
