Snmp-Based Monitoring - ATTO Technology ATTO XstreamCORE FC 7500 Installation And Operation Manual

SNMP-based monitoring

The Simple Network Management Protocol (SNMP) facilitates
the exchange of management information between network
devices.
An agent residing in the XstreamCORE takes information from
the XstreamCORE and translates it into a form compatible
with SNMP.
Consult your network administrator for further assistance
with SNMP.
1. If you are not already in the XstreamVIEW™ interface,
type the IP address of your XstreamCORE in a standard
browser as found in Using XstreamVIEW™ System
Manager, click Enter Here, type in your user name and
password, and click OK.
2. On the left-hand menu, click Remote Management.
3. The Remote Management page appears.
4. Click on the enabled radio button next to the SNMP
heading.
5. Click on the appropriate radio button for SNMP Traps,
SNMP Extended Traps.
6. SNMP Traps and SNMP Extended Traps are
notifications for SNMP functions such as device
transition and device error.
7. Enter the IP addresses of those who should receive
messages (SNMP trap recipients) in the text boxes on the
left.
8. Select the type of message you wish each recipient to
receive from the drop down box next to each address.
9. Click Submit.
20 | P a g e