Appendix B Cli Provides Ascii-Based Interface - ATTO Technology ATTO XstreamCORE FC 7500 Installation And Operation Manual

The command line interface (CLI) provides access to the ATTO XstreamCORE Services through a set of ASCII commands. CLI commands may
be entered while in CLI mode.
XstreamCORE Services provide configuration and monitoring
for the XstreamCORE. The command line interface (CLI) is a
set of ASCII-based commands which perform these tasks. CLI
commands may be entered while in CLI mode.
CLI commands are context sensitive and generally follow a
standard format: [Get|Set] Command
[Parameter1|Parameter2] followed by the return or enter
key
CLI commands are case insensitive: you may type all upper or
all lower case or a mixture. Upper and lower case in this
manual and the help screen are for clarification only.
Commands generally have three types of operation: get, set
and immediate.
The get form returns the value of a parameter or setting and
is an informational command.
Responses to get commands are followed by Ready.
Symbol
sasConn
E 13 S ,
XHIBIT YMBOLS TYPEFACES AND ABBREVIATIONS USED TO INDICATE FUNCTIONS AND ELEMENTS OF THE COMMAND LINE INTERFACE USED IN
.
THIS MANUAL

Appendix B CLI Provides ASCII-based Interface

Indicates
[ ]
Required entry
< > Optional entry
| pick one of
... Ellipses, repetition of preceding item
\n end of line
- a range (6 – 9 = 6, 7, 8, 9)
fl Fibre Channel LUN (0 <= fl <= 255)
fp Fibre Channel port number (1<= fp <=1 or 2)
SAS connector name (A, B, C, D)
mp1 Ethernet port used to manage the XstreamCORE
The set form is an action that changes the value of a
parameter or configuration setting. It may require a
SaveConfiguration command and a restart of the system
before it is implemented. The restart can be accomplished as
part of the SaveConfiguration command or by using a
separate FirmwareRestart command. A number of set
commands may be issued before the SaveConfiguration
command.
Responses to set commands are either an error message or
Ready. *. The asterisk indicates you must use a
SaveConfiguration command to finalize the set command.
SaveConfiguration asks if you want to restart the system or
not.
Set commands which do not require a SaveConfiguration
command, defined as immediate commands, are executed.
Responses to Immediate commands are either an error
message or data results followed
by Ready.
Command conventions
27 | P a g e