Atto Xstreamcore Overview; Atto Xstreamcore™ Fc 7500 Features, Benefits - ATTO Technology ATTO XstreamCORE FC 7500 Installation And Operation Manual

The ATTO XstreamCORE 7500/7550/7600 is a storage controller that connects multiple shelves of SAS and SATA JBOD storage and virtualizes
it to a Fibre Channel SAN Connection.
The ATTO XstreamCORE FC 7500/7550/7600 allows IT
departments to architect storage systems with the flexibility
to use standard interface off-the-shelf storage hardware with
increased bandwidth and low latency levels which improve
performance and response. As a Data Center building block,
the7500/7550/7600 allows IT managers to architect their
storage solution on their terms, avoiding vendor lock-in with
ATTO XstreamCORE™ FC 7500 features, benefits
The ATTO XstreamCORE™ FC 7500 is a 16-Gigabit Fibre
Channel to 12-Gigabit SAS storage controller configured with
two independent 16Gb Fibre Channel ports and four 12Gb
x4 SAS connectors.
Designed to integrate industry-leading performance and
SAN capabilities into the future generation of storage
solutions, the XstreamCORE™ FC 7500 uses a high-
performance architecture suited for OEMs looking to
incorporate SAS or SATA disk storage devices in their Fibre
Channel SAN.

Two independent 16Gb Fibre Channel ports which
auto-negotiate to 4Gb, 8Gb or 16Gb Fibre Channel

SFP+ Fibre Channel modules included

Dual Power Supply

Full support for FC-AL, FC-AL2, FC-FLA, FC-FS, FCP-3,
PLDA

ATTO XstreamCORE Overview

modularity at each layer. The 7500/7550/7600 is used to
aggregate and virtualize storage on a SAN (Storage Area
Network) and has undergone qualifications with industry
leading storage and SAN infrastructure products. The
7500/7550/7600 is easily integrated into IT infrastructures,
providing lower operational costs with tools like a PCIe
Analyzer, Drive Map Director™ and XstreamVIEW™.

Support for private loop, public loop, point-to-point
or fabric point-to-point

Support for direct connect to F-port switches

Four independent 12Gb SAS/SATA x4 mini-SAS HD
connectors which auto-negotiate to 3Gb, 6Gb or
12Gb

Automatic LUN Mapping

Patented Drive Map Director™ reduces operating
expense by auto-configuring storage

2500 MB/s throughput for 1 MB transfers

500,000 IOPS for 4KB read transfers and 400,000 IOPS
for 4KB write transfers

XstreamVIEW™ integrated management console for
remote configuration, management and diagnostic
capabilities

Supports SAS and SATA hard disk drives
5 | P a g e