Interface Options; Using Xstreamview™ System Manager; Opening An Xstreamview™ Session; Optimizing Xstreamview™ In Internet Explorer - ATTO Technology ATTO XstreamCORE FC 7500 Installation And Operation Manual

16/32-gigabit quad fibre channel to 12-gigabit sas storage controllers
Table of Contents

Advertisement

Alternative methods to the ATTO XstreamVIEW™ Interface may be used to manage the XstreamCORE. ATTO XstreamVIEW™ System
Manager is the recommended interface.
Using XstreamVIEW™ System Manager
Each page in the ATTO XstreamVIEW™ System Manager
provides information and/or configuration parameters based
on a specific topic.
ATTO XstreamVIEW™ is the recommended management tool
for the XstreamCORE. It is a web-based graphical user
interface (GUI) that allows you to manage the XstreamCORE
by clicking choices and commands in traditional GUI fashion
or by entering CLI commands directly, as you would in a
terminal emulation session, on the Advanced CLI
Configuration page.
Opening an XstreamVIEW™ session
1. Point your browser at the IP address of the
XstreamCORE. Refer to Discover the IP address.
2. The XstreamVIEW™ home page is displayed. Click Enter.
3. Enter the user name and password values.
The default values are user name: root and password:
Password. The user name is case insensitive and password is case
sensitive. It is best practice to change user names and passwords.
Refer to Modify passwords.

Interface Options

4.
The Status page appears.
Each page can be reached through the menu at the side of
each page. An image on each page's header shows each port
in the product faceplate. Each port is clickable and takes you
to the appropriate page.
If you have completed configuration operations and have
clicked Submit on the page you are viewing, go to the Restart
page and restart the XstreamCORE to save the settings.
If you have not completed configuration changes, go on to
the next page.
Optimizing XstreamVIEW™ in Internet Explorer
1.
Go to the browser toolbar and select Tools.
2.
Select Internet Options.
3.
Select the Security tab.
4.
Click on the Trusted Sites icon.
5.
Select the Custom Level button.
6.
Go to the Miscellaneous topic and set the Allow META
REFRESH option to Enable.
7.
Press the OK button in the open dialogs to apply the
updated settings.
24 |
P a g e

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Atto xstreamcore fc 7550Atto xstreamcore fc 7600

Table of Contents