Graco LineLazer IV 250MMA Operation, Parts page 14
Self-propelled line striper, for the application of line striping materials, for use with only benox l40lv liquid initiator bpo b, for professional use only, for outdoor use only, not for use in hazardous locations or explosive atmospheres, maximum operat
Table of Contents
Advertisement
Flushing Procedure
c. Disengage the trigger lock.
3. Press the gun trigger button until pressure is gone
(below 500 psi).
4. Close material supply lever (B) on mix manifold.
14
5. Check to see that you have the solvent pump on.
ti26789a
6. Open solvent valve (A) on mix manifold.
7. Press the gun trigger button until material is flushed
and solvent is clear.
8. Flushing of catalyzed material is complete.
3A3111 A
- Quick Links:
- 16P125 Slave Pump Linkage Parts
Hide quick links:
Advertisement
Table of Contents
