Oem Responsibilities For All Products Containing The Enabler Lpp G Module - Enfora Enabler LPP G Integration Manual

13.8.1. OEM Responsibilities for All Products Containing the Enabler LPP G module

In addition to any other regulatory requirements, OEMs and integrators must include or provide
the following information, instructions, warnings and labels with any device or product into which
the Enfora Enabler LPP G GSM1900 GSM transceiver has been incorporated:
Information Description
The OEM must provide an operating/installation manual with the final product which clearly
Detailed
indicates that these operating conditions and restrictions must be observed at all times to
Operating
Instructions for ensure compliance with current FCC guidelines which limit human exposure to radio
ensuring frequency radiation.
compliance with 20 cm (7.87 inch) separation distance between the antenna and all persons must be
current FCC maintained at all times for all fixed and mobile products and applications
guidelines which Portable devices and applications are prohibited unless such devices and products are
limit human specifically authorized by the FCC
exposure to radio Maximum antenna gain is limited to 2 dBi* in mobile products and applications
frequency For fixed applications (2 meter separation) the antenna gain can be as much as 26 dBi.
radiation Modifications and/or additions to the Enfora Enabler LPP G GSM transceiver, including use
of antennas with higher gain than those authorized by the FCC, are prohibited
*dBi = antenna gain in dB relative to an isotropic radiator
Attach the following warning label
directly to or displayed next to the
Antenna
antenna. Furthermore, this label must
Avoidance
be visible to and easily readable by all
Label
persons in the immediate vicinity of the
antenna
Include the following statement in the
Human Exposure
instruction / operation manual.
Compliance
Statement
LPP0108IG001
To comply with FCC RF exposure
requirements, a separation distance of 20 cm
(7.87") or more must be maintained between
this antenna and all persons
Enfora certifies that the Enfora Enabler LPP G ™
MHz GSM Radio Module (FCC ID: MIVLPP0108)
complies with the RF hazard requirements
applicable to broadband PCS equipment
operating under the authority of 47 CFR Part 22 or
Part 24, Subpart E of the FCC Rules and
Regulations.
This certification is contingent upon installation,
operation and use of the
Enfora Enabler LPP G module and its host
product in accordance with all instructions
provided to both the OEM and end used. When
installed and operated in a manner consistent with
the instructions provided, the Enfora Enabler LPP
G module meets the maximum permissible
exposure (MPE) limits for general population /
uncontrolled exposure at defined in Section
1.1310 of the FCC Rules and Regulations.
Version - Preliminary – 06/20/08
69
WARNING