7. Battery Charging Calibration and Configuration
7.1. Objective
The objective of this document is to outline how to configure the Enabler LPP G based battery charger for
specific batteries and chargers.
7.2. Supported Devices
Enabler LPP G
7.3. References
LPM0108AT001- Enabler LPP G AT Command Set
7.4. List of battery charging commands
The following is a list of Locosto/Triton-Lite battery charger AT commands, and who is responsible for
setting their parameters.
Enfora should set the default parameters so the overall charging scheme will work "out-of-the-box".
However, it is the customer's responsibility to configure the charging scheme to conform to their particular
battery(-ies) and charger(-s).
Command
AT$BAT
AT$BCIDBG
AT$BCIMNI
AT$BCIN4A
AT$BCIVSF
AT$BCIISF
AT$BCIAVG
AT$BCIMAP#
(1,2,3,4,5)
AT$BCIPCT#
(1,2,3,4,5)
AT$BCICHG#
(1,2,3,4,5)
AT$BCIBAT#
(1,2,3,4,5)
AT$BCITMP#
(1,2,3,4,5)
AT$BCIDEL
AT$BCIOFF
LPP0108IG001
Information
Calibrated
by Enfora
X
X
X
X (internal
only)
X
X
38
Calibrated by
Set by
Customer
Enfora
Opt.
X
X
X
Version - Preliminary – 06/20/08
Set by
Customer
Opt.
X
Opt.
X
X
X
X
X