Introduction; Product Overview; Key Features Of The Enabler Lpp G Module - Enfora Enabler LPP G Integration Manual

4. Introduction

4.1.

Product Overview

The Enfora Enabler LPP G module is a compact, wireless OEM module that utilizes the Global
System for Mobile Communications (GSM) and General Packet Radio Services (GPRS)
international communications standard to provide two-way wireless capabilities via GSM services.
This GSM/GPRS module is combined with a Global Positioning System (GPS) chipset to provide
physical location, a host processor to ensure very low power standby configurations, and
vibration sensor to detect movement of the module. The Enfora Enabler LPP G module is a fully
Type-approved GSM/GPRS device, enabling application-specific, two-way communication and
control.
The small size of the Enfora Enabler LPP G module allows it to be integrated easily into the
application and packaging.
4.2.

Key Features of the Enabler LPP G Module

The following table summarizes the main features of the Enfora Enabler LPP G Radio Module.
Data input/output interface
Interface
Primary serial port
Secondary serial Port
USB port
Audio
Command protocol
Subscriber Identification Module
(SIM)
Battery Charger
Electrical power
Power
Peak currents and average
power dissipation
Frequency bands
Radio Features
GSM/GPRS features supported
Agency approvals
Regulatory
GSM/GPRS
Functionality
LPP0108IG001

Mobile-originated and mobile-terminated SMS messages: up to 140 bytes or
up to 160 GSM 7-bit ASCII characters.

Reception of Cell Broadcast Message

SMS Receipt acknowledgement

Voice (EFR, FR, HR, AMR)

Supports Unstructured Supplementary Service Data (USSD)

Multi-Slot Class 10 Supported (4Rx/2TX), (5 Slot Max) PBCCH/PCCCH
Supported
7
50 position 1.27mm pitch
3.3V levels, '2-wire' UART implementation
Single TX from GPS, NMEA data only.
USB Debug and Configuration
Digital audio
Enfora Packet API, GSM AT command set, Enfora
MCP
USIM port with SIM detect, Optional embedded
SIM.
Lithium Ion battery charger, temperature and
battery ID analog inputs
3.3 to 4.5 Vdc (vbat)
Refer to the Operating Power table in the
Technical Specifications for peak currents and
average power dissipation for various modes of
operation.
EGSM 900, GSM1800, GSM 850 and GSM 1900
capability.
Provides for all GSM/GPRS authentication,
encryption, and frequency hopping algorithms.
GPRS Coding Schemes CS1-CS4 supported.
Multi-Slot Class 10 (4RX/2TX, Max 5 Slots).

GCF Type Approval

PTCRB Type Approval

FCC Certification

RTTE

CE (European Community Certification)

IC (Industry Canada) Approval
Version - Preliminary – 06/20/08