ROBBE Telemetry-Box Instruction Manual page 21

6. To install the new software at this point, select the "Browse" field and mark the desired file.
Important note:
ensure that you have also selected the correct file format; Firmware update = frm file /
Speech update = snd file. Installing the wrong file type could ruin the device.
The latest software updates can be found at http://www.robbe.de/telemetry-box-2-4-ghz-fasstestr.html.
To install the software, click on "Download". The following display appears:
Important note:
It is essential not to disconnect or switch off the device during the update procedure. In the worst case
this could ruin the device.
7. Close the field once the installation is successfully completed.
8. After installation, switch the Telemetry-Box off and remove the USB lead. The new software can now be used.
Telemetry-Box 2.4 GHz FASSTest
®
21