Table Of Contents; Safety Notes - ROBBE Telemetry-Box Instruction Manual

CoNTeNTS
Please be sure to observe the Safety Notes.!
1. Safety Notes ..................................................... 2
2. General Description.......................................... 3
3 Set Contents ..................................................... 3
4. Specification ..................................................... 3
5. Controls ............................................................ 4
6 Mounting the Telemetry-Box on the transmitter 5
7. Switching the Telemetry-Box on ....................... 6
8. Charging the Telemetry-Box ............................. 6
9. Binding the Telemetry-Box to the transmitter ... 7
10. Menu Structure / Description of Navigation ...... 8
11. Explanation, Telemetry display ......................... 9
12. Explanation, Speech Output display .............. 10
13. Explanation, Volume display .......................... 10
14. Programming menu, main display .................. 11
14.1 Speech menu ................................................. 11
14.2 Display menu .................................................. 11
14.3 Sensor Set-up menu ...................................... 12
14.4 Sensor Register menu ................................... 14
14.5 Model Select menu ........................................ 15
14.6 Language Select menu .................................. 16
15. USB PC Port .................................................. 16
16. Recommended Accessories .......................... 17
17. USB Driver installation for Telemetry-Box ..... 18
18. robbe Telemetry-Box Update ......................... 20
19. Service Centre Addresses ............................. 22
2
Telemetry-Box 2.4 GHz FASSTest
20. Guarantee ...................................................... 23
21. Disposal of Old Equipment............................. 23
22. Conformity Declaration ................................... 24
®
1.

SAFeTy NoTeS

!
• Avoid kinking the aerial cable.
• The device is designed to be recharged from a USB
port only. Never charge it using a different voltage.
• Never attempt to charge the device using the S.Bus
socket, as this could ruin it.
• The Telemetry-Box switches itself off automatically
when the battery voltage falls to 3.3 V. If this should
happen, you must still switch the Telemetry-Box off
using the switch on the back of the unit.
Please check the battery voltage before every flight.
• It is essential to protect the device from dust, soiling and
damp.
• Avoid subjecting the unit to shock and pressure, and do
not expose it to severe vibration.