Recommended Accessories - ROBBE Telemetry-Box Instruction Manual

16. reCoMMeNDeD ACCeSSorIeS

vario and altimeter (Tek)
No. F1672
Precision variometer with altitude
and variometer monitoring using
two separate pressure sensors.
GPS Multi Sensor No. F1675
Multi-functional GPS vario / alti-
tude / distance / position sen-
sor for the FASSTest® telemetry
system.
vario-Sensor No. F1712
Small, light, low-cost vario / alti-
meter for the FASSTest® teleme-
try system. back to the previous
menu. The sequence and display
unit are automatically configured
by the individual robbe-Futaba
sensor ID when the sensor is
registered (to the transmitter or to
the Telemetry-Box).
Temperature sensor 125°C No. F1713
Temperature sensor 125°C, for
the FASSTest
The sequence and display unit are
automatically configured by the
individual robbe-Futaba sensor ID
when the sensor is registered (to
the transmitter or to the Telemetry-
Box).
Temperature range: -20...+125°C
Telemetry-Box 2.4 GHz FASSTest
telemetry system.
®
®
Telemetry-Box aerial adapter,
26 mm
No. F1666100
Adapter for mounting the
Telemetry-Box on the FC-18 trans-
mitter.
Gooseneck for Telemetry-
Box
No. F1666200
Gooseneck for mounting the
Telemetry-Box on all transmitters
with option wells for switches, e.g.
FX-20.
Telemetry-Box bayonet
adapter
No. F1666300
Adapter for mounting the
Telemetry-Box on all transmitters
with bayonet-fit aerial, e.g. T14MZ
and FX-40.
17