AEMC OX 5042 Quick Start Manual page 10

ITEM BUTTON
OPERATING MODE BUTTONS
Press these buttons to select the desired operating mode:
1
NAVIGATION BUTTONS
Use these navigation buttons to move around the menus and dialog
boxes:
VERTICAL
2
HORIZONTAL
ENTER
CHANNEL A, B
MATH/MEMORY BUTTONS
3
NOTE: For the M (memory) channel, pressing twice invalidates the chan-
nel. Pressing once again selects the Math channel, the memory is lost and
must be reloaded.
ON/OFF BUTTON
4
FUNCTION BUTTONS
5
CHARGE STATUS
6
- Oscilloscope
- Multimeter
- Harmonic analyzer
- Vertical movement and automatic selection in the secondary menus
- Adjustment of values in the main menus
- Vertical movement in a dialog box
- Horizontal movement through the main menus
- Adjustment of values in the secondary menus
- Horizontal movement in a dialog box
- Opens a dialog box from a main menu or a secondary menu
- Validation of the items in a dialog box
- A single press selects channel A (or B) and shows the corresponding
menu.
- Pressing twice deselects the channel.
- A single press selects channel M (Math) and shows the corresponding
menu.
- Pressing twice deselects the channel.
- The instrument is turned ON by a short press on this button. It is
turned OFF by a long press (a shutdown message appears and a beep
sounds).
- Auto Set: Performs an automatic adjustment on channels A and B.
The success of each vertical autoset conditions the activation of the
channel.
- Run Hold: Starts or stops an acquisition.
- Battery Charge LED
DESCRIPTION