Multitest-Dv Display Panel; On-Screen Icons - Mecmesin MultiTest 1-dV Operating Manual

MultiTest-dV Display Panel

The display indicates the stand's status, displays live values and is used to configure the
test stands settings.
The purpose of the four multi-function buttons is indicated on screen by an adjacent
icon. Below is an image showing a typical example of the on-screen icons in relation to
the physical buttons.

On-Screen Icons

On-screen icons vary depending on the current state of the test stand and what functions
the physical buttons perform at that point. Below are reference tables to help explain the
icon definitions, in relation to the test stand state.
1. Test Readiness
Icon Action
No AFG connected / No ELS connected (if in dV(u) mode).
Start the test sequence.
Go to jog mode.
Go to settings.
MultiTest-dV Operating Manual
Top button is 'confirm'
Upper middle button is 'up'
Lower middle button is 'down'
Lower button is 'back'
Mecmesin  25