CHIEF PSB-2264 Installation Instructions

I N S T A L L A T I O N I N S T R U C T I O N S
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480
(2) Interface Brackets
(4) 10-24 x .500 Button Head Cap Screws
(4) Nylon Spacer .740" x .390" x 1.00"
(1) 1/8" Allen Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
CAUTION!
WARNING!

1. Chief Q-latch Button Installation

Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button, with
chamfered hole of mounting button (larger surface) facing bracket (four places) (see Figure 2 & Figure3).
PSB-2264
DISPLAY MOUNTING BRACKET
DISPLAYS ARE EXTREMELY FRAGILE.
ALL COMPONENTS MUST BE SECURELY FASTENED TO A
STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4
TIMES THE COMBINED WEIGHT OF ALL COMPONENTS
PLUS THE EQUIPMENT BEING MOUNTED. IF IT CANNOT
SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE
REINFORCED.
THE MAXIMUM WEIGHT TO BE INSTALLED ON THE
MOUNT IS 175 POUNDS (79.38 KG).
Figure 2
Chief Manufacturing, a division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918
Figure 1
(4) Mounting Buttons – Tapped
(4) M10 x 50mm Hex Head Cap Screw
(4) Nylon Spacer 22mm x 10.4mm x 20mm
(1) Wrench, Hex 17mm
Figure 3
8804-000368
©2008 Milestone AV Technologies,
A Duchossois Group Company
11/08