Advertisement
Red Label is the newest series of projection screens from KAUBER, designed for avid
cinematography fans. This model is characterised by increased distance between the projection surface and
the wall and thus can be installed directly over flat TV screen.
1. Downside screen bar has damage-protection tape. Remove the tape only after step 6 of the following
manual.
2. Assemble the screen away from moisture and strong sunlight.
3. Clean with soft, moist cloth. Do not use abrasive cleaning agents. Protect inside of the screen from
water and other liquids. After cleaning, remove all moisture carefully with a dry cloth.
Projection screen
Assembly handle
Ceiling assembly angle bar
Screw Ø 6x60
Rawlplug Ø10
Bolt M6x12
Pad M6
Key for screen end positions adjustments
Wall key switch (available with screen without built-in radio control)
ASSEMBLY AND MAINTENANCE NOTES
Contents of the set:
w
w
w .
k
NOTE!!!
a
u
b
e
r .
-3-
Quantity
1 pc.
2 pcs.
2 pcs.
6 pcs.
6 pcs.
4 pcs.
10 pcs.
1 pc.
1 pc.
e
u
Advertisement
