Cardax Prox Mifare Series Installation Note page 3

Please note that 200mm in all directions includes the distance through walls.
Mounting
Note: The Prox Mifare Series (Teardrop) reader has been designed to metric
specifications. Therefore any imperial measurements provided are
approximate only.
The Prox Mifare Series (Teardrop) reader is designed to be mounted on any
solid flat surface. However installation on metal surfaces, particularly those
with a large surface area will reduce read range. The extent to which the range
is reduced will depend upon the type of metal used. To minimise this effect,
plastic spacers which may be mounted between the reader and the metal
surface are available (Part number C190980). Please contact your local Cardax
dealer for more information.
Note: The grommet through which the cables feed into the base of the Prox
Mifare Series (Teardrop) reader helps to keep the unit waterproof.
Using the mounting dimensions on the back of this Installation Note as a guide,
drill a 20 mm (
Part number 3E1100 R12
June 2007
Proximity
Reader
Wall
Less than
200mm
thick
/ inch) diameter hole for the base extrusion through or into the
3
4
Proximity
Reader
3