Technical Specification; Approvals And Standards - Cardax Prox Mifare Series Installation Note

Technical specification

Note: All specifications are subject to appropriate installation.
Routine maintenance and serviceable parts:
Not applicable for a Cardax Prox Mifare Series (Teardrop) reader
Cleaning:
The Cardax Prox Mifare Series (Teardrop) reader should only be cleaned
with clean, lint free, damp cloth
Power required:
Voltage
Current
Environmental:
Operating temperature
Humidity
Environmental Protection
Note: Direct sunlight may increase the internal reader temperature above
Mounting Height:
1100mm (3 ft) to centre

Approvals and Standards

This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by Gallagher Group
Limited could void the user's authority to operate the equipment.
Part number 3E1100 R12
June 2007
13.6 ± 15% V DC
< = 180mA
-10
95% non-condensing
IP54
the ambient temperature level.
C to +50 C
0 0
ACN: 002132943
17