Check Software Version - Cardax Prox Mifare Series Installation Note

Note:
If you are installing the Prox Mifare Series (Teardrop) reader to control a
turnstile you should consult the turnstile manufacturer for details of the locking
mechanism used.
Push-Button Exit
If the door has a push button exit, ensure the URI Exit terminal has the push-
button fitted and correctly terminated with a 10 k resistor before you power
on.

Check Software Version

You should check the URI software version to ensure it is correct for your
installation. The software version number is written on the label of the EPROM
mounted at the bottom right of the URI processor board.
URI software versions that are compatible with the Prox Mifare Series
(Teardrop) reader are shown below:
vW3.61 to vW3.67 or vW6.xx
vW4.74 to vW4.81 or vW9.xx
Note: * These software versions will have one of the following suffixes:
GT = 2 wire modem connection
G = 4 wire modem connection
// = direct connection via comms lines ie. no modem
12
Software
series *
vW7.xx TC series
series *
Reader Type
One door Cardax Prox or Swipe Readers
URI Special Options
Two door Cardax Prox or Swipe Readers
Part number 3E1100 R12
June 2007