Do not attempt to disassemble, modify, or repair the NJJ-95B.
Doing so could cause fire, electric shock, or breakdown.
When the power cord is damaged (exposed core wire, open circuit failure, or
broken sheath), please contact our headquarters on Page 93 or our nearest
branch office, sales outlet, or service station for a replacement power cord.
Use of a damaged power cord could cause fire or electric shock.
Stop using the NJJ-95B immediately when a sign of malfunctioning is
detected, and follow only the detailed procedure in this instruction manual. If it
cannot be restored to normal operation, contact our nearest branch office,
sales outlet, or service station. Use of the NJJ-95B in abnormal state could
cause fire or breakdown.
Should the NJJ-95B emit an abnormal sound, odor, or smoke, immediately turn off the power
switch, remove the battery pack, disconnect the power plug from the socket outlet, and
contact our nearest branch office, sales outlet, or service station.
Use of the NJJ-95B in abnormal state could cause fire, electric shock, or breakdown.
6.1 Daily Inspection
Before attempting to operate this radar, confirm that the battery pack, optional equipment cables,
and the like are connected correctly and there is no abnormality in appearance.
6.2 Daily Maintenance
Users are not to carry out any maintenance except for cleaning of the radar's external surfaces.
Wipe out stains with a soft damp cloth (which was squeezed of any excess water after being
soaked in cold or warm water), and then wipe the radar with a dry cloth again. Do not use solvents
such as thinner, benzine, and alcohol because they may damage the top finish of the radar.
Maintenance Inspection
6
WARNING
- 85 -