JRC Handy Search NJJ-95B Instruction Manual page 53

Remarks
• Real time manual deduction processing performs the same processing as deduction
processing for image processing during scanning.
See section 3.4.5 "Deduction Processing" regarding deduction processing.
• If image processing is performed for scan data by using real-time manual deduction
processing and the surface wave data for manual surface wave processing is rewritten,
data may not be reproduced during scanning.
See section 3.4 "Image Processing."
• If scanning is to be performed again after scanning is complete using real-time manual
deduction processing, automatic real-time surface wave processing using the fixed
surface wave data will be performed.
• The fixed cursor position shows the rear end of this unit and can be used to decipher the
position of the rebar during scanning.
Figure 3-9 Display after real-time manual deduction processing
Example of where results for object that is not being probed
overlaps with the fixed cursor position
（Press 5 ENTER）
- 41 -