Charging Device Bc-3008 Series - JRC Handy Search NJJ-95B Instruction Manual

3.10.2 Charging Device BC-3008 series

The battery charger BC-3008-series is exclusively used with the battery pack BP-3007-series.
When the battery pack is in the availability "0" state, charging will take about 2.5 hours.
(1) Procedure for using the charger
a) Mount the battery in the charger (see Fig. 3-23-(1))
While pushing the battery pack against the charger, slide it in the direction indicated by
the arrow. Mounting of the battery pack is completed when it is pushed in until the shutter of
the charger is hidden.
b) Connect the AC cord to the charger
Connect the AC cable to the charger, and connect the AC cable plug to the socket
outlet. The CHARGE lamp (orange) on the charger will light indicating the start of charging.
(See Figure 3-23-(2).)
c) Completion of charging
When the CHARGE lamp goes off, the battery pack has been charged enough for
"practical use." The battery pack will be "fully charged" if it is charged for another hour
continuously after the lamp goes off.
d) Removing the battery
When charging is finished, remove the battery pack sliding it in the opposite direction
from the mounting, and disconnect the AC cable plug from the socket outlet.
Notes
● Thoroughly read the "charger instruction manual" to use the battery
charger correctly and safely.
● Charge the battery pack in a place where the ambient temperature is 0 to 35℃ and the
humidity is 45 to 90%.
● After using the battery charger, be sure to disconnect it from the socket outlet. Dismount
the battery pack from the charger within 24 hours after it has been charged.
Remarks
• Store the battery pack in a cool location to ensure the longevity of the battery. It is
recommended to charge the battery in an area with a temperature between +10 and +30
°C.
- 72 -