3.4.3 Reproduction of original image
This processing restores the image processing result to the original state and displays
unprocessed raw data.
Procedure for reduction processing: (See Figure 3-14.)
a) Press the 6 PRCS key.
a)
"Inverting display" mode will be indicated at the bottom right hand side of the screen as
the operation switches to image processing from the manual mode..
Set "Original image" using the cursor keys
b)
performed.
To end the image processing mode, press the 6 PRCS key again.
c)
"Normal display" is shown as the item for "Processing" at the bottom of the screen and
image processing mode is exited.
A: Before processing
▲▼
Figure 3-14 Reproduction of original image
- 49 -
. Reproduction of original image will be
B: After processing