Electrolux GA55SLI302 User Manual page 43

A - water drain outlet
E - socket
G - dimension of the appliance
K - cold water supply
N - dimension of the recess
W - hot water supply
If you connect the water drain hose to a trap
spigot under the sink, remove the plastic
membrane (A). If you do not remove the
membrane, remaining food can cause a
blockage in the drain hose spigot
A safety device impedes the dirty water
to go back into the appliance. If, the spi-
got of the sink has a 'non-return valve',
this can cause the appliance to drain in-
correctly. Remove the non-return valve.
To attach the appliance to the adjacent
units
Make sure that the counter below which you
attach the appliance is attached to a safe
structure (adjacent kitchen units, cabinets,
wall).
1. Set the appliance in front of the kitchen
unit.
2. Put the mains cable and the hoses into
the recess unit.
3. Push the appliance in the recess unit. Do
not squash or bend the hoses and mains
cable.
4. Align the appliance and attach it on the
two sides in the upper area of the cabinet.
Different procedures to attach the
appliance to the adjacent units
1. On the plinth.
2. A special top bracket. This is available
only as a special accessory. Contact the
service centre.
electrolux 43
50