Download  Print this page

Multitab Function; Loading Cutlery And Dishes - Electrolux GA55SLI302 User Manual

Hide thumbs

Advertisement

Table of Contents
32 electrolux
When the rinse aid dispenser is empty,
the display shows a message: REFILL
RINSE AID.

Multitab function

The multitab function is for combi detergent
tablets.
These tablets contain agents as detergent,
rinse aid and dishwasher salt. Some types of
tablets can contain other agents.
Do a check if these tablets are applicable for
the local water hardness. Refer to the in-
structions from the manufacturer.
When you set the multitab function, it stays
on until you deactivate it.
The multitab function deactivates the flow of
rinse aid and salt.
The multitab function deactivates the salt and
the rinse aid messages.
The programme duration can increase if you
use the multitab function.
Activate the multitab function before the
start of a washing programme.
You cannot activate the multitab func-
tion when the programme operates.

Loading cutlery and dishes

Hints and tips
Do not use the appliance to clean objects
that can absorb water (e.g. sponges, house-
hold cloths).
• Before you load cutlery and dishes, follow
these steps:
– Remove remaining food.
– Make remaining burnt food in the pans
soft.
• While you load cutlery and dishes, follow
these steps:
– Load hollow items (e.g. cups, glasses
and pans) with the opening down.
– Make sure that water does not collect in
the container or in a deep base.
– Make sure that cutlery and dishes do not
bond together.
– Make sure that the glasses do not touch
other glasses.
– Put small objects in the cutlery basket.
– Mix the spoons with other cutlery to pre-
vent them from bonding together.
– Arrange the items to let water touch all
surfaces.
The message does not show while a
washing programme operates.
To activate the multitab function
• Go to the option menu and activate the
multitab function. Refer to 'Control panel'.
To deactivate the multitab function and use
separately detergent, salt and rinse aid:
1. Go to the option menu and deactivate the
multitab function. Refer to 'Control pan-
el'.
2. Fill the salt container and rinse aid dis-
penser.
3. Adjust the water hardness setting to the
highest level.
4. Do a washing programme without
dishes.
5. Adjust the water softener to the water
hardness in your area.
6. Adjust the rinse aid dosage.
• Plastic items and pans with non-stick
coatings can retain the water droplets.
• Put light items in the upper basket. Make
sure that the items do not move.
The lower basket
Put the saucepans, lids, plates, salad bowls
and cutlery in the lower basket. Arrange the
service dishes in the front part of the basket.

Advertisement

Chapters

Table of Contents
loading