Selecting Further Settings; Safety Lock 0 - Miele KWT 6831 SG Operating And Installation Instructions

Selecting further settings

Certain settings on the appliance can
only be selected in settings mode.
When in settings mode, the door
alarm is automatically deactivated.

Safety lock 0

The safety lock can be activated to
prevent:
– the appliance being switched off
inadvertently,
– inadvertent changing of temperature,
– Dynamic cooling being selected
inadvertently,
– the display lighting being
inadvertently switched on.
Activating or deactivating the lock
^ Touch the settings sensor.
All symbols available for selection
appear in the display and the 0 symbol
flashes.
^ Touch the OK sensor to confirm the
selection.
The last selected setting flashes and
the 0 symbol lights up in the display.
20
^ By touching the X or Y sensor, you
can now select whether the safety
lock is activated or deactivated:
0: the safety lock is deactivated
1: the safety lock is activated.
^ Touch the OK sensor to confirm the
selection.
The selected setting is applied, the 0
symbol flashes.
^ Touch the settings sensor to leave
settings mode.
Otherwise the appliance exits
settings mode automatically after
approximately one minute.
The 0 symbol will appear in the
display when the lock is activated.