Table of Contents
Advertisement
pulseEKKO PRO
3.3.5.2
Set Odometer Manually
When Odometer Calibration is selected, the user is prompted to manually enter the odometer calibration
factor. In general, this method of odometer calibration is not recommended because it will not be as
accurate as calibrating the odometer over a known distance.
3.3.5.3
Odometer Direction
This setting determines whether data are collected as the system is rolled forward or reverse. The back up
arrow (Section 6.6.2: P89) will work in the direction opposite to this setting. The available options are:
Forward and Reverse.
3.3.6 Fibre Optic Testing
As part of troubleshooting a problem with the system, the fibre optic cables can be tested for damage
(Section 7.2: P99).
49
3-System Setup Parameters
- Quick Links:
- System Configurations
- Data Collection
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the pulseEKKO PRO and is the answer not in the manual?
Questions and answers