Introduction; Hardware; Communication; Screen Characteristics - Trane IntelliPak Programming Manual

Introduction

The purpose of this guide is to assist you in installing, programming, and operating with the
TracerTD7 Display and the Web UI, which interacts with the unit controls. This guide describes how
to access the screens and the types of information that appear on the screens.
The Tracer TD7 display is mounted to the unit and allows you to view data and make operational
changes to the equipment.
The Web UI is a built in service tool that allows users to set up, operate, and troubleshoot the
equipment.

Hardware

The Tracer TD7 is a durable factory-mounted touch screen display that is designed to operate in
both indoor or outdoor environments. The TD7 display utilizes a standard 75mm VESA mounting
pattern for installation in a Trane Large enclosure. Alternatively, it can be installed with a user-
supplied VESA mount.

Communication

A separate Ethernet cable provides communication between the Tracer TD7 display and the unit
controller.

Screen Characteristics

The 7-inch WVGA 800 x 480 resolution touch-sensitive color screen is backlit, which enables
viewing in poor light conditions including outdoor usage (with the exception of direct sunlight).

Touchscreen Guidelines

The touch screen registers the downward pressure of a touch. Light, quick, yet deliberate touches
are most effective. Touching with more pressure has no effect.
Recommended tools to use:
•
•
•
Do not use:
•
•
•
•
6
finger
thumb
pencil eraser
a screwdriver
a pen
a pencil point
any other sharp or pointed object that might scratch the screen surface
RT-SVP011A-EN