Vav Zone Controller; (Pl-Vc2000) - Prolon PL-RS Quick Start Manual

VAV Zone Controller

32-122 °F (0-50 °C) Non-condensing
16
REV 1.0 / PL-QCK-WSENSOR/VC2000-EN

(PL-VC2000)

Network communication Network communication
General purpose analog input General purpose analog input
(0-5 VDC, 4-20mA, 10K thermistor) (0-5 VDC, 4-20mA, 10K thermistor)
Supply / Radiant / Zone / Occupancy / Discharge Supply / Radiant / Zone / Occupancy / Discharge
Digital sensor (T1000, T500 or T200) / Digital sensor (T1000, T500 or T200) /
Remote computer with Focus Remote computer with Focus
Analog output (0-10 VDC) (max current: 40 mA) Analog output (0-10 VDC) (max current: 40 mA)
Digital output - Isolated Triac Digital output - Isolated Triac
Dry contact (24 VAC) (max current: 750 mA) Dry contact (24 VAC) (max current: 750 mA)
Power source of the controller Power source of the controller
(24 VAC - Class 2) (24 VAC - Class 2)
Airflow Sensor (PL-VC2000-PI) Airflow Sensor (PL-VC2000-PI)
Airflow sensors are only included in the PL-VC2000-PI Airflow sensors are only included in the PL-VC2000-PI
models only. Adding an airflow sensor to the Prolon VC2000 models only. Adding an airflow sensor to the Prolon VC2000
lets it regulate the airflow as well as temperature in a zone, lets it regulate the airflow as well as temperature in a zone,
independently of the static pressure variations of the system. independently of the static pressure variations of the system.
The default flow sensor has a range of 0 to 2 in H20 The default flow sensor has a range of 0 to 2 in H20
(0 to 500 Pa). Depending on the flow cross used, this (0 to 500 Pa). Depending on the flow cross used, this
translates to roughly 0-3500 ft/min. translates to roughly 0-3500 ft/min.
cULus Listed; UL 916 Energy Management Equipment, File E364757, Vol.1
REV 1.0 / PL-QCK-WSENSOR/VC2000-EN
Service pin Service pin
17